For our impeccable safety record, CHEVRON PHILLIPS awards BFIM "Year 2016 Contractor Safety Excellence Award"...

Trading Division

VALVES

Process plants consist of hundreds, or even thousands, of control loops all networked together to produce a product to be offered for sale. Each of these control loops is designed to keep some important process variable such as pressure, flow, level, temperature, etc. within a required operating range to ensure the quality of the end product.

Valves are a critical element of a control system in industrial process animation—designed to sustain high pressure and temperatures, to open and close quickly to control flow, to provide strength against erosion and corrosion or to be sterile to meet strict documentation requirements. The most common final control element in the process control industries is the control valve. The control valve manipulates a flowing fluid, such as gas, steam, water, or chemical compounds, to compensate for the load disturbance and keep the regulated process variable as close as possible to the desired set point.

Control valves play a critical role in the Power and Process industries, as they serve as the final control element in the process control scheme. Control valves directly control flow and depending on the control loop, indirectly control pressure, temperature, and other process variables.

The primary function of a safety valve is to protect property and life. Because a safety valve is often the last device to prevent catastrophic failure under pressure conditions, it is important that the valve works at all times i.e. it must be 100% reliable.

Safety valves should be installed wherever the maximum allowable working pressure of a system or pressure containing vessel is likely to be exceeded. Pressure excess can be generated in a number of different ways including:

  Failure of a cooling system allowing vapour or fluid to expand.

  Compressed air or electrical power failure to control instrumentation

  Plant fires

  During the start-up conditions of a plant


The term “Safety Valve” and “Relief Valve” are generic terms to describe a variety of pressure relief devices. A wide range is available based on the application and required performance criteria. The different designs are required to meet numerous national standards.

Our valves are also designed with a variety of trim configurations and materials of construction to ensure reliable performance and long life.

OUR MATERIAL SUPPLIERS


SEVERN GLOCON

SEVERN GLOCON

With more than 50 years’ experience, Severn Glocon Group provides world-class engineered valve products and services to onshore, offshore and subsea plants across the globe. We provide leadership in design, manufacture and technical services for severe service control and choke valves, using reliability data from our unique performance evaluation systems. These services are complemented by our wide range of mechanical isolation valves and actuators, along with proven operational plant support. We deliver world-class quality, which translates into optimum reliability and performance for plant operators globally; even in the most extreme environments.

However, we understand that the face of the energy industry is changing. To meet the technological challenges of the coming decades, we are laying foundations to take research and development activity to new heights. Our aim is to play a lead role in helping operators solve complex valve issues, including those associated with subsea applications, deep-water activity and mega-projects.

Severn Glocon Group holds world-class engineering intelligence at its core. This ethos is set to drive exciting new valve innovations to meet the evolving needs of the industry.

Recognized worldwide as a leading approved supplier of control and choke valve design solutions, Severn Glocon products provide optimum operational performance for some of the most challenging industry areas and applications.


Severn Glocon Group’s control and choke valves have played an integral role maximising the safety and profitability of oil and gas production for more than 50 years. Today we provide a wide range of valves and associated services to the full spectrum of energy industries, including subsea, LNG and power. Industry leaders know they can rely on our high-integrity products and advanced engineering to help them overcome complex and extreme production demands.

As the energy sector evolves Severn Glocon Group will continue to drive innovations that extend valves’ reliability and performance. We’re also ramping up our diversification strategy, making significant progress in environmentally-focused areas such as renewable power and water purification.

Severn Glocon Group’s intelligence-led engineering also benefits other industries including water & wastewater, industrial, petrochemical and marine engineering.


DESIGN AND MANUFACTURING CENTERS

Severn Glocon’s investment in design and manufacturing centres combines the best of British engineering and the cost benefits of global sourcing and localised completion. This structure offers customers a flexible combination of design and manufacturing to deliver the most cost-effective valve solutions.

They have primary manufacturing and design centers, supported by assembly and testing capabilities local to our end users.

  Gloucester, UK: headquarters and primary centre for major projects, cryogenics & industrial gas.

  Brighouse, UK: dynamic manufacturing for custom design and fast track delivery.

  Chennai, India: alternative manufacturing centre to Gloucester for all valve products.


APPLICATIONS & APPROVALS



UPSTREAM OIL & GAS PRODUCTION

  Compressor anti-surge recycle

  Pump minimum flow recirculation

  Separator level control

  Production & re-injection choke

  Discharge to flare

  Export pump minimum flow recirculation

AIR SEPARATION

  Cold box

  Joules Thompson valves

  Top entry designs

  Compressor anti-surge

  High process oxygen valves for pressure reduction stations

  Distribution valves

  Bulk handling valves for UHP gases for semi-conductor industry

GAS GATHERING, LNG & NGL PRODUCTION, EXPORT & IMPORT FACILITIES

  Compressor anti-surge recycle

  Discharge to flare

  Cryogenic applications

  Joules Thompson valves

  Methanol / glycol injection

OIL & GAS TRANSITION PIPELINES

  Pressure reducing stations

  Black powder contaminated applications

  Pipeline flow control

SUBSEA

  Control fluids

  Well fluids containing H2S / CO2 gas

  Injection chemicals

WATER SERVICES

  Power cooling water & steam

  Desalination

  Firewater protection systems

CHEMICAL & PETROCHEMICAL PROCESS

  Ammonia Syngas

  Chlor-alkali

  Cryogenics

METAL TREATMENT

  Aluminum Production

  Iron & steel

  Furnace exhaust

ENGINEERED VALVES FOR GREENFIELD PROJECTS


Series W Pneumatically Spring & Diaphragm Actuators

Designed to satisfy the majority of general control valve applications, the Series W Pneumatically Operated Spring & Diaphragm Actuator is especially suited to areas of high fire risk.

With proven reliability, even in the most adverse climate conditions and temperatures, the range comprises three basic actuator sizes which, when combined with different spring ranges, provide a travel capability of up to 3½ (89mm). The spring air fail action delivers crucial reliability for critical applications and a pre-compressed bench set is available across the range of fitted springs.


X3301 Multispectrum Infrared Flame Detector

DESIGN FEATURES

  High power, fast response

  Operates from low-pressure air supply

  Low-stressed, positive spring fail action in either air fail open or close orientation

  Field reversible

  Steel construction with minimal parts for low-cost, trouble-free operation and maintenance. The assembly is bolted to a cast yoke combining lightness with mechanical strength

Download Brochure

Series P Linear Spring Cylinder Actuator

Designed for fitting onto a wide range of control valves, louvres or dampers, these high power actuating units are for use in on/off, or modulating service. Their thrust capacity is much greater than similar size diaphragm spring actuators thanks to air pressures as high as 150psig (10bar) being used.

They operate either as a single, or double-acting unit and a range of springs is available to provide positive air fail action, which is field reversible. Positioners are normally yoke mounted and of the double-acting type providing air to both sides of the piston and giving a robust and precise unit that is resistant to load fluctuations and transients.


X3301 Multispectrum Infrared Flame Detector

DESIGN FEATURES

  High thrust capability capable of using air supplies up to 150psig (10bar)

  Multi-size options with long stroke capacity

  Robust components for trouble free, low cost ownership

  Positive spring air fail action, which is reversible

  Lightweight corrosion resistant construction

  Rotary options available

Download Brochure

Series 8000 Butterfly Valves

Designed to provide cost effective, reliable control valves for use in low-pressure applications, the high performance Series 8000 valves feature a stainless steel disc with either a soft, or stainless steel seal ring. The soft seal option provides excellent sealing capabilities in both directions. The pressure-assisted stainless steel alternative delivers excellent shut-off against pressure applied in the recommended flow direction for both liquid and gas applications.


X3301 Multispectrum Infrared Flame Detector

DESIGN FEATURES

  Heavy-duty solid body construction provides rigid support

  Robust parts for trouble free service and low maintenance costs

  Field-replaceable seat located in valve body, away from flow, provides bubble-tight shut off

  Available with low noise and anti-cavitation options

  Heavy-duty taper pins connect the value shaft to the disc which avoids lost motion under high torque conditions

  Heavy shaft guiding

  Wide choice of packing systems

  Low friction bearings provide maximum radial support

Download Brochure

Series 5000 Globe Valves

A development of the Severn Glocon Series 4000 and Glocon Nova valves, the Series 5000 range of globe valves benefits from more than 30 years of in-field experience to deliver cost effective, easily maintained, reliable and high quality valves for the most severe applications.

The wide choice of materials used for manufacture offers bespoke application solutions, while the smooth body flow path reduces turbulence, minimising the effects of erosion and noise.


X3301 Multispectrum Infrared Flame Detector

DESIGN FEATURES

  Smooth profile cast globe, angle and three way body construction

  Quick-change trim as standard with screwed-in seat option

  Wide choice of trim sizes available with low noise and anti-cavitation options

  Robust parts for trouble free service and low maintenance costs

  Inherently characterised trims available in linear, bi-linear, equal percentage or semi-throttle

  Substantial guiding

  Wide choice of packing systems including low fugitive emission designs

  Integral plug stem construction option

  Both balanced and unbalanced trim designs with soft seat insert options

Download Brochure

Series 1200 Globe Valves

Derived from the Series 5000 range of globe valves, the Series 1200 range benefits from more than 30 years of in-field experience to deliver cost effective, easily maintained, reliable and high quality valves for the most punishing applications.

The wide choice of materials used for manufacture offers bespoke application solutions, while the smooth body flow path reduces turbulence, minimising the effects of erosion and noise.


X3301 Multispectrum Infrared Flame Detector

DESIGN FEATURES

  Smooth profile cast globe, angle and three way body construction

  Quick-change trims standard with screwed-in seat option

  Wide choice of trim sizes available with low noise and anti-cavitation options

  Robust parts for trouble free service and low maintenance costs

  Inherently characterised trims available in liner, bi-linear, equal percentage, quick open or semi-throttle

  Substantial guiding

  Wide choice of packing systems

  Integral plug stem construction option

  Both balanced and unbalanced trim designs with soft seat insert options

Download Brochure

HIPPS (High Integrity Pressure Protection System)

The Severn Glocon Group is able to offer integrated High Integrity Pressure Protection Systems (HIPPS) for oil and gas installations. Rated SIL 1– 4, they are designed and built in accordance with IEC 61508 and IEC 61511 safety instrumented systems (SIS) standards and provide a dual electronic and mechanical redundancy solution.


X3301 Multispectrum Infrared Flame Detector

BENEFITS OF HIPSS

Severn Glocon Group integrated HIPPS are designed to set a new standard in safety, performance, assembly and test of high integrity pressure protection systems, enabling oil and gas operators to:

  Reduce the environmental impactof pressure release burn off valves

  Reduce the potential economic impact arising from a lack of containment and subsequent loss of production and increased maintenance costs

  Reduce the catastrophic effect of a lack of containement to both people and the environment

  Significantly reduce process risk enabling development of higher pressure / flow rate fields - flowline and riser pipe rated to the flowing pressure

  Economically tie-back high pressure marginal fields to existing pipeline infrastructure and topsides

Download Brochure

LESER

LESER

With more than 800 employees, LESER is the largest manufacturer of safety valves in Europe and a leader in its market worldwide. LESER safety valves are used by leading companies in industries such as chemical, petrochemical, industrial gases, oil and gas production, and machine building, as well as the food and pharmaceutical industry. LESER offers spring-loaded and pilot-operated safety valves for all industrial applications according to PED and ASME VIII as well as application-based solutions for special requirements.

LESER safety valves are developed for the international market at our headquarters in Hamburg / Germany and manufactured at our modern factory in Hohenwestedt / Germany. In addition, LESER India produces safety valves for the local market.

Eight subsidiaries in Europe, America, the Middle East, and Asia, as well as authorized and trained representatives in over 80 countries guarantee competent consulting and quick, reliable delivery.

LESER PRODUCTS


HIGH PERFORMANCE

HIGH PERFORMANCE

Flanged safety valves with especially high capacity for their size. With a large quantity of valve sizes, pressure ranges and product options, they have proven themselves as a universal safety valve for many applications.


ADVANTAGES

  High blow-off capacity in comparison to valve size

  Universal valve for many applications up to DN 400 / 16" or 300 bar / 4350 psig

  Proven thousands of times

  Outstanding value for the price

  Simple and robust construction

  Single trim (identical internal parts for steam/gas/liquid) allows economical maintenance

  Large selection of options for different operating conditions

  Quick delivery (2 - 4 weeks from the factory or next day from local warehouse)

  Can be equipped with additional supplementary loading system or bursting discs

API

API

Flanged safety valves that meet all the requirements of API 526 such as standardized orifices and center-to-face dimensions. Their robust construction makes them especially suitable for high pressures and materials like Duplex, Monel or Hastelloy.


ADVANTAGES

  100% Compatibility to API 526

  Single Trim (identical internal parts for steam/gas/liquids) allows economical maintenance

  Quick delivery (2 - 4 weeks from the factory or next day from local warehouse)

  Quick delivery for high-alloy materials

  Longer valve lifespan due to hardened disc and (partially) stellited seat

  Longer lifespan of optional bellows through integrated shielding

COMPACT PERFORMANCE

COMPACT PERFORMANCE

Threaded and flanged safety valves with compact dimensions for economical protection of small and midsized capacites. Many orifice diameters, seals and connections offer a very wide area of application.


ADVANTAGES

  Compact design with high capacity relative to valve size

  Large selection of possible connections and seals for different operating conditions

  Quick delivery (2 - 4 weeks from the factory or next day from local warehouse)

  Space-saving horizontal installation possible

  Single Trim (identical internal parts for steam/gas/liquids) allows economical maintenance

  Longer lifespan of optional bellows through integrated shielding

HIGH EFFICIENCY

HIGH EFFICIENCY

Pilot operated safety valves and supplementary loading systems for optimal tightness right up to set pressure.


ADVANTAGES

  Pilot Operated Safety Valve

  Piping between the pilot and main valves is integrated into the cover to prevent damage and freezing

  Integrated Backflow Preventer as standard part

  Four week delivery time from the factory

  Higher capacity than comparable size with extra orifices

  20% less installation space than competitors' comparable models

  Supplementary Loading System

  Higher operating pressures are possible

  Closing pressure difference of up to -3 %; opening process is independent of back pressure

  Functional test and valve adjustment possible during operation

  Max. 0.1 sec. for valve to open completely

MODULATE ACTION

MODULATE ACTION

Flanged safety valves with a standard or proportional opening characteristic. They minimize medium loss when opening and are used for thermal relief applications, liqud service and protection from pressure peaks.


ADVANTAGES

  Minimal medium loss when opening

  Outstanding value for the price

  Simple and robust construction

  Proven thousands of times

  Single trim (identical internal parts for steam/gas/liquid) allows economical maintenance

  Quick delivery (2-4 weeks from the factory or next day from local warehouse)

  Equippable with bursting discs

CLEAN SERVICE

CLEAN SERVICE

Safety valves for the food, beverage and pharmaceutical industries that meet all the relevant standards and regulations such as DIN 11866 or ASME BPE.


ADVANTAGES

  EASY CLEANING THROUGH:

  Low deadspace ratio (L/D from up to < 0.33)

  HyTight Assembly: seamless design of internal parts

  Valve is made completely of stainless steel--no cast parts

  High surface quality up to Ra max = 0.375 µm / 15 µinch

  Surfaces packages according to ASME BPE and DIN 11866

  EASY PROCESS INTEGRATION THROUGH:

  Cleaning in place (CIP) or Sterilizing in place (SIP) with pneumatic lifting device possible

  large selection of aseptic connections

  FDA-conformant Elastomere

CRITICAL SERVICE

CRITICAL SERVICE

PTFE-lined flanged safety valves for corrosive media such as chlorine, acids, and lyes. With their highly resistant lining they offer a safe solution for corrosive media.


ADVANTAGES

  PTFE parts in different designs for optimized resistance to highly-corrosive media

  Economical alternative to high-alloyed materials

  Carrier gas blanketing using double-walled pipes is possible

BEST AVAILABILITY

BEST AVAILABILITY

Change-over valves for increased plant availability and bursting discs in type-tested combination with safety valves.


ADVANTAGES

  Change-over Valves:

  Low pressure loss due to streamlined construction

  Compact construction for space saving installation

  Bursting disc (KUB) in combination with safety valves:

  Tightness until opening

  Component-tested safety valve and bursting disc combination: conformity to the 3% criteria--bursting disc does not have to be factored-in during layout.

S & R Valves

S & R Valves

Safety valves to meet the requirements of local codes and standards such as for heating systems (TRD 721).


ADVANTAGES

  In-line relief valves directly integrated into the pipe line

  Standardized valves for short delivery times


MOGAS

MOGAS

MOGAS is known for partnering with its customers to meet the ever-increasing challenges of severe-service applications. Building upon our extensive field experience, we relentlessly pursue research & development breakthroughs in design, materials, coatings and other technologies to deliver the most-trusted, highest-quality valves in any industry. When a company works with MOGAS, every aspect of the experience is designed to provide the products, service, knowledge and responsiveness needed to get the job done – on time, as promised.

MOGAS manufactures dependable severe service ball valves for power plants, refining and petrochemical processes, and oil & gas and mining industries worldwide.

MOGAS standard metal-seated isolation and rotary control ball valves range in size from ½–42" and are available in 150 to 4500 ASME pressure classes. Larger sizes and unique material requirements are available upon request.


MOGAS METAL-SEATED BALL VALVES HAVE PROVEN SUCCESSFUL IN THESE PROCESSES



OIL & GAS

  Cavern Fill and Withdrawal

  Compressor Anti-Surge

  Dryer Sequence (Mol-Sieve)

  Emergency Shut Down (ESD)

  First Stage Separation

  Gas Metering / Gathering Control

  High Integrity Pressure Protection Systems (HIPPS)

  High Pressure Gas Injection

  LNG Feed Gas

  Main Gas Storage Flow Control

  Plant Depressurization

  Positive Isolation Tandem

  Severe Pressure Reduction Control

  High pressure drops

  Erosion

  Fugitive emissions

  High velocity

  Liquefied gas

  Multi-phase crude

  Sour gas

  Hydrate formations

  Noise limitations

  Vibration

CHEMICAL / PETROCHEMICAL

  Acetic Anhydride.

  Isophthalic Acid

  Isocyanate

  Molten Salt

  Methyl (MECL) / Dichloronethane (DCM)

  Olefins

  Polyethylene

  Polypropylene

  Polysilicon

  Phosgene GAS

  Purified Terephthalic Acid (PTA)

  Raffinate

  Vinyl Chloride Monomer (VCM)

  Abrasive silica

  Corrosive attacks

  Fugitive emissions

  High cycling

  High velocity of rock hard particulates

  Lethal media

  Liquified wax

  Molten slurry

METAL & MINERALS

  Autoclave: HPAL (High Pressure Acid Leaching)

  Autoclave: Pox (Pressure Oxidation)

  Slurry Transport

POWER GENERATION

  Fossil Fuel

  Combined Cycle

  Power Walkdown Inspection

REFINING

  Catalytic Cracking

  Coking

  Deasphalting

  Distillation

  Gasification

  Hydrocracking

  Hydrotreating

  Reforming

  Visbreaking

OTHER INDUSTRIES

  Aerospace

  Food Processing

  Pulp & Paper

MOGAS PRODUCT RANGE


C-SERIES

C-SERIES Customizable isolation valves for specific applications

The C-Series valve is the best choice in large bore isolation applications. MOGAS engineers have successfully designed the C-Series valve line which isolates under the extreme conditions – high temperature up to 1652°F (900°C), high pressures up to 43,000 psig (2965 bar g), media build-up, cycling with solids in the line and erosive attack of materials and coatings. With more than 40 years of engineering expertise, each C-Series valve is designed specifically for the application.


C-SERIES Components C-SERIES Features & Benefits C-SERIES Dimensions
GEN-X

GEN-X Cold Reheat Drain Valves

MOGAS Gen-X metal-seated severe service ball valves are engineered in accordance with ASME TDP-1 2013. The Gen-X valves are built and tested for the prevention of water damage to your steam turbines. The cold reheat drain, hot reheat drain and main steam drain Gen-X valves meet and/or exceed TDP bore and reliability requirements.

Dual metal alloy upstream and downstream seats with chrome carbide up to HRC 69 hard coating prevent downstream sealing damage from flashing, especially in carbon steel cold reheat lines. MOGAS Gen-X valves are offered for both automated on/off and manual on/off valve applications throughout today’s power plant.


GEN-X Data Sheet
PORV

PORV Power Operated Relief Valves

The MOGAS PORV, a pneumatic actuated pressure relieving valve, prevents excessive system pressure accumulation. The set pressure of the PORV is lower than that of the spring-loaded safety valve to prevent or reduce the number of lifts of the safety valve, thus extending their life. The PORV is available either non-stamped or with the “V” stamp. The “V” stamped PORV has been flow certified by the National Board of Boiler and Pressure Vessel Inspectors.


PORV Data Sheet

iRSVP Vent and Drain Valves

Through years of field experience, working with major power producers and a sophisticated performance analysis procedure, MOGAS has developed a product line dedicated to absolute isolation of critical equipment, dependable on/off operation for drains and vents, as well as longer valve life for increased run-time. MOGAS provides its advanced technology to the power industry with the iRSVP valve designed to handle high temperatures, high pressures, high cycling, thermal shock and abrasive media.

iRSVP

  Integral vented body design allows installation per ASME B31.1 PWHT requirement.

  Four-year warranty (one-year warranty on high-cycle applications)

  Patented design


iRSVP Features & Benefits
iRSVP vs Globe Valve Comparison
SC-3PC

SC-3PC Inline Repairable Valves

The SC-3PC has a three-piece body assembly with two proprietary body seals that allow the valve body to be easily removed while the end connections remain in line. The design also allows the valve body to be tested after repair, prior to insertion back in-line. The SC-3PC is used in power plants for isolation of high pressure / high temperature applications.


SC-3PC Data Sheet

MAX-SERIES Custom-Engineered Solutions

Custom requests are part of our legacy. MOGAS has been in the business since 1973, engineering and fabricating that one exclusive valve that is a non-standard crucial component for your operating system. Unique bore sizes, different end connections and special trim materials are accomplished through our engineered products group.

Below are some of the products MOGAS has engineered to solve isolation and flow control problems:

  Modular Process Units (Skids)

  Special Linkage (Dual Valves, Quad Valves)

  Ultra High-pressure Valves

  Unique Bore or Inlet / Outlet Sizing

  Diverter / Switching Valves

FLEX-STREAM

FlexStream® Control Valve Technology

FlexStream® control technology.

The internal control elements (or trim) use flow paths of various configurations to control flow and pressure drop. This compact trim configuration, located downstream of the seat, consists of a diffusion element and a control element.

1. The diffusion element splits and aligns the flow through an arrangement of straight paths.

2. The control element reduces the flow velocity through an arrangement of tortuous flow paths and open area.

The variable characterization of the control element allows precise pressure letdown and superior velocity control tailored to specific process conditions.


FlexStream Reduces Gas Storage Costs

REMBE®

MOGAS

REMBE® provides customers in all industries with safety systems for their plants and equipment. All products are made in Germany and meet the requirements of national and international regulations. REMBE® customers include market leaders in numerous sectors, such as the oil and gas, food, wood, chemical, pharmaceutical and petrochemical industries. REMBE® takes a comprehensive approach, primarily developing and making its own products while also providing the relevant consultancy, engineering and service.

The independent family enterprise, founded in 1973, employs a global workforce of around 180. REMBE® has its headquarters in Brilon, in the hills of the Sauerland region (Germany), and runs eight subsidiaries to support its worldwide customers right where they are. Thanks to its short lines of communication, the company can respond quickly and find customised solutions for all applications, ranging from standard products to special high-tech designs. Its most important proprietary products and processes include the KUB reverse acting buckling pin bursting disc and flameless venting technology- REMBE® has active worldwide engagements on various professional bodies and is also involved in planning and setting up international standards and regulations.

RD Definition

EN ISO 4126

A bursting / rupture disc device is a non-reclosing pressure relief device used to protect equipment such as pressure vessels, piping, gas cylinders or other enclosures from excessive pressure and/or excessive vacuum.

API 520

Rupture disc devices are non-reclosing pressure relief devices used to protect vessels, piping and other pressure containing components from excessive pressure and/or vacuum. Rupture discs are used in single and multiple relief device installations. They are also used as redundant pressure relief devices

REMBE PRODUCTS


Q-ROHR

Q-ROHR Q-Rohr® - the original of flameless venting

SAFE AND COST-EFFECTIVE SOLUTION FOR INDOOR APPLICATIONS

Safety and operating efficiency go hand in hand. The Q-Rohr® enables you to implement flame arresting and particulate retention explosion venting in closed rooms. No complicated ducts for outdoor venting or associated restructuring of production equipment are required. With the Q-Rohr® there is now nothing to prevent you from using the optimum layout for your production plant while guaranteeing the best possible explosion safety. In addition, Q-Rohr® is unrivaled in terms of running costs. Eliminating vent ducts saves you money not only on installation but also on servicing and maintenance.


APPLICATIONS

The Q-Rohr® is ideal for indoor plants that are at risk of dust and gas explosions. Many new plants are equipped directly with the Q-Rohr® as it offers a wide range of flexible installation options. Retrofitting is also simplicity itself. The Q-Rohr® can be used to protect filters, dryers, cyclones and can be used with gases, hybrid mixtures, metal dusts, melting dusts or fibres. Optional sanitary cover prevents accumulation / contamination of the Q-Rohr® flame trap mesh in dusty areas.

KUB®

KUB® most rugged rupture disc currently available!

KUB® is not only extremely easy to install – it is also simple to remove and reinstall. In addition to a standard operating pressure ratio of up to 98%*, the design is robust enough to cope with incorrect handling before and during installation. The IG holder also helps in this regard. The rupture disc and holder are designed to ensure that it is impossible to insert the rupture disc incorrectly. KUB® does not use bite-type seals. Instead it uses a leak-tight, metal-on-metal seal, which allows the rupture disc to be reinstalled after inspection.


REMBE® reverse acting rupture disc KUB®

For operators this means:

  Simple, quick and torque-independent installation of the rupture disc with no special tools required

  No risk of premature opening or damage to the rupture disc

  Longer service life of the rupture disc reduces the costs associated with production downtime, maintenance and replacement discs.


Using Leonard Euler’s formula, we developed a unique cut profile – known as buckling pins – for the KUB’s rupture element. Careful selection of the buckling pin geometry and arrangement in combination with the material of the rupture disc offer accurate control of the response pressure of KUB®. Moreover, the rupture disc is so rugged that even touching the dome of the membrane or dropping it accidentally from waist height will not affect its performance.

KUB® is the ideal solution for a wide range of challenging industrial processes with low to high operating pressures or vacuum, e.g. in liquid, gas or vapour applications as well as in two-phase flow applications. Its broad pressure spectrum allows you to equip many different processes seamlessly with just this one type of rupture disc – a major advantage: only one disc holder system is required. If the process conditions change (e.g. a different operating pressure), you can simply replace the rupture disc and continue to use the same holder. That saves money!

TARGO-VENT

ARGO-VENT Opening angle limiter

Add-on module for explosion vents to reduce the size of endangered areas

In the case of an explosion outside a building, explosion vents open and release the explosion flame and pressure wave into the environment. Adequate safety areas are crucial. They must be kept free of buildings and be out of bounds to both vehicles and pedestrians. These empty areas cannot be used commercially but still incur operating costs. TARGO-VENT limits the opening angle of an explosion vent in order to protect people, vehicles or subsequently erected buildings. By decreasing the size of endangered areas, TARGO-VENT helps you to reduce your safety areas to a minimum and increase usable operating space while providing optimum protection against explosions.


APPLICATIONS

Ideal for rectangular explosion vents

  Venting into areas used by vehicles or pedestrians

  Used in outdoor applications

  Venting into previously clear areas, which have subsequently been built upon


ADVANCED ACTUATORS

ADVANCED ACTUATORS

Advanced Actuators Ltd is a well established U.K. based leading supplier of actuators, control solutions and hydraulic components. Since 1969 we have supplied a range of diverse markets, including oil & gas, power generation, nuclear, marine, and industrial marketplaces throughout the world

Advance have a determined and dedicated approach to customer satisfaction through a competent and enthusiastic team which has forged a company that is both modern and aware of marketplace requirements.

Advance have a strong external sales coverage through a skilled and experienced sales team. This delivers exceptional brand awareness and customer intimacy. The sales force is supported by a well-resourced, highly qualified, technical product and system design team.

Advance have a total commitment to quality and you can rest assured that the components we supply are tried, trusted and fully supported with technical, pre and after sales backup.

To complement the wide range of components and services shown, Advanced Actuators Limited has a well equipped workshop and test facility, which is staffed by skilled and company trained personnel, providing a quick and controlled response to both scheduled, new build and breakdown requirements.

  Advance operate a Quality Management System which is registered to ISO9001-2008.

  Advance are members of the British Valve and Actuator Association (BVAA)

  Advance are also members of NOF Energy, the business development organisation for the oil, gas, nuclear and offshore wind sectors in the UK.

  Advance have a global network of official distributors.

ADVANCED ACTUATORS


LINEAR SELF-CONTAINED ACTUATORS

LINEAR SELF-CONTAINED ACTUATORS

These Actuators are a Self Contained closed loop system with electronic positioning from a variety of electronic control signals with fully adjustable thrust and speed for each direction of travel.


KEY PRODUCT FEATURES

  Fully modulating or isolating

  Advanced Actuators bullet pointFrom weatherproof to hazardous area Zone 1 IIB T3

  Advanced Actuators bullet pointFail fix or fail close/open

  Advanced Actuators bullet pointThrusts up to 80,000kg

  Advanced Actuators bullet pointAdjustable speeds and thrusts

  Advanced Actuators bullet pointSolar powered if required

The E range of actuators is suitable for on-off (isolating) or continuous (modulating) duty and can readily interface with a computer, programmable logic controller or conventional electrical control gear. Actuators can be made to respond to either analogue or digital control signals and can be supplied with solid state adjustable set points to correspond to desired positions of travel, mechanical limit switches, transducers, potentiometers, starters, position controllers and continuous position indication.

The versatility of hydraulics enables simple adjustment of speed and thrust/torque whilst various valve combinations enable the piston rod/output rod to be either locked or unlocked when at rest. Manual operation can be provided via a handpump whilst emergency power operation utilising either disc springs or accumulators can be incorporated as required.

HYDRAULIC STEPPING ACTUATOR

The Advanced Actuators range of Stepping Actuators are based on widely used mechanical principles, which we have refined and improved upon to give a reliable, cost effective product available with hydraulic controls.

Generally the actuator is coupled into a hydraulic ring main provided by others. Via a series of hydraulic controls and two directional solenoid valves oil is fed into one of two cylinders, which act upon a mechanical ratchet/gear wheel. The rotation of the gear wheel is selected by giving an electrical pulse to one of the two solenoid valves. Linear motion is achieved via a drive nut, which is connected to the gear wheel.


HYDRAULIC STEPPING ACTUATOR

The mechanical drive mechanism can be supplied complete with drive nut threaded drive shaft, valve actuator mounting bracket and stem connector to fit directly to your valve.

KEY PRODUCT FEATURES

  Rotary Stepping Hydraulic

  Steps per Revolution – 17 to 45

  Speed 0 to 120 steps per minute

  Supply voltage – 24 VDC

  ATEX – EX II 2GD, Eexd IIC T6

  Ingress Protection – IP66 to IEC 60529/NEMA4X





ADDITIONAL INFORMATION

OPTIONAL EXTRAS

For operators this means:

Electronic Actuator Position Controller – 24 VDC, 4-20mA Command & Feedback signal (ATEX EExd, IS or HART, SMART or Foundation Fieldbus) Position Indication – Rotary Potentiometer ATEX – EX II 2GD, Eexd IIC T6, IP66 to IEC 60529/NEMA4X or alternatively Limit Switches up to four.

Electrical Enclosure – Copper Free Aluminium or Stainless Steel.

Hand Wheel for manual control.

TARGO-VENT

HYDRAULIC CYLINDERS

We offer a complete range of Heavy duty high quality fully serviceable metric hydraulic cylinders to CETOP/R10H


KEY PRODUCT FEATURES

  Cylinder Bore diameter 20 to 750mm

  Working Pressure upto 400 Bar

  Maximum stroke up to 7.5 mtr

  Maximum speed upto 1200 mm/sec

  Hydraulic Fluids – Standard Mineral Oils, Water Glycol, Oil emulsions (95/5, 60/40 etc) and water.

  Options include – various mountings, adjustable cushioning, double ended piston rods & Stainless Steel Piston Rods

  Maximum stroke up to 7.5 mtr

ADDITIONAL INFORMATION

This design of Hydraulic Cylinder has become the industry standard for heavy industrial applications throughout Europe.


AS-SCHNEIDER

AS-SCHNEIDER LOGO

For 140 years, the family-owned company AS-Schneider has supported its customers with competence, know-how and pioneering ideas.

Today, AS-Schneider is among the world's leading manufacturers of Instrumentation and Pipeline Valves with approximately 350 employees. In the niche Industrial Valves for Large-Bore Diesel Engines, such as those used in ship engines and for power generation, AS-Schneider is the market leader worldwide.


STRONG PARTNER ON YOUR SIDE

With an international network made up of our subsidiaries and partners in more than 20 countries, we ensure that our customers receive the engineering know-how from AS-Schneider worldwide. Customers benefit from suitable solutions which are distinguished by efficiency, longevity and technological progress - convince yourself!

INSTRUMENTATION VALVES & MANIFOLDS


AS-Schneider with its headquarters in Germany is one of the World‘s Leading Manufacturers of Instrumentation Products such as E Series Valves and Manifolds, Gauge Valves and Pressure Gauge Accessories, Soft Seated Valves and Manifolds, Schneider DirectMount Systems, Mini Valves and Rupture Disc Holders, Modular Mounting Systems, Double Block and Bleed Valves such as Monoflanges and VariAS-Blocks, Needle Type Globe Valves, Ball Valves, F Series Manifolds and Multi-Way Cocks, Air Headers, Flange Adapters and suitable Accessories.



DOUBLE BLOCK & BLEED PIPELINE BALL VALVES

TAURUS SERIES

S-Schneider Taurus Series Double Block & Bleed Pipeline Ball Valves are available with a lot of options. The Taurus Series are basically Full Bore Valves but are also available as Reduced Bore Design. Primary and Secondary Isolation Valve are, as standard, ball type valves with Floating Ball or Trunnion Ball Design, the bleed valve can be provided as integral needle type valve with screwed or flanged bonnet as well as flanged valves like ball valves, Double Block & Bleed Valves (VariAS-Blocks) or Monoflanges. Standard Flange Connections acc. to ASME B 16.5. The Taurus Series are also available as Block & Bleed Type. Pressure Classes: Class 150 to Class 2,500. Bore Sizes: 1" to 6"


Our Principals

Severn Glocon Glocon Group PLC

Valve Management Services (Control Valves, Severe Service; HIPPS System Integration etc)

Visit Site

LESER The Safety Valve

Safety Relief Valves; Pilot Operated Safety Valves, Change Over Valves

Visit Site

SCHNEIDER Tailored to Your Business

Instrumentation Valves and manifolds, double blocked and bleed pipeline ball valves; Valves for large bore diesel engines etc.

Visit Site

Fluenta

Flare Gas Flow Meters

Visit Site

REMBE Safety is For Life

Bursting Disc Systems, Rupture Discs, Explosion Safety Systems

Visit Site

Advanced Component Technology Actuators Limited

Hydraulic Actuators

Visit Site

CONTACT US FOR ENQUIRIES:
  +966 (13) 864 0980 Ext. 156